Home > MANUFACTURERS >

BCM MK2 BFH 14.5" MIDLENGTH UPPER RECIEVER GROUP W/ MCMR-13 HANDGUARD NO CH

BCM MK2 BFH 14.5" MIDLENGTH UPPER RECIEVER GROUP W/ MCMR-13 HANDGUARD NO CH
 
  $844.99

Stock Status:(Out of Stock)

Product Code: BCM-MK2-URG-MID-14BFH-MCMR-13
Qty:



The following items are included FREE with this product:

DESCRIPTION
 
Bravo Company builds: Life Saving Tools™
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
BCM’s Patent Pending MK2 Upper Receiver
This proprietary design offers enhanced rigidity over the USGI product. The increased rigidity limits barrel deflection which aids in consistency/accuracy. Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment. A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face.
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammunition.
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

NOTE: We spec BCM 14.5" uppers with an unpinned A2 flash hider so you can install your preferred muzzle device and have it pinned by your gunsmith. -All NFA rules apply.
All BCM® Upper Receiver Groups with a MCMR Handguard Include:
-One 3" Picatinny Rail Section
-One BCM MCMR Sling Mount

TEST FIRE DISCLAIMER:
Many of the manufacturers whose products we carry will have a standardized test fire protocol for not only their complete firearms as well as parts such as upper receiver groups and bolt carriers. Because of this test fire protocol, some items will show evidence of the test fire process such as brass and carbon residue on internals or brass markings on case deflectors.
Why the BCM MK2 is SO GOOD

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Service July 8, 2024
Reviewer: Marc from Buffalo Grove , IL United States  
Warcomp fit great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Bcm mk2 bfh 14.5 midlength upper mcmr 13 January 16, 2024
Reviewer: Billy from SC, United States  
At first I was a little hesitant to buy from this company because I never heard of freedom trading before, but in all honesty they had some really good prices, and had an upper in stock that the other sites didn’t. Shipping and update communication was very fast compared to other companies. I would highly recommend freedom trading to anyone especially those that haven’t heard about them before.

The gun is good too, I haven’t put too many rounds into it yet but it’s a Bcm so it should hold up to anything anyone throws at it.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 I received the BCM Upper receiver within 3 days December 17, 2023
Reviewer: Anonymous Person from Cornelius, NC United States  
Excellent company. The guys really took the time to make sure I was getting what I wanted.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Excellent product and great customer services November 21, 2023
Reviewer: Mike Lewis from Colorado  
This is my new favorite online store , excellent customer service, I’ve called 3X and I get a person on the phone answering my questions with a great attitude,  very nice BCM MK2 BFH upper, shipping is quick

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 BCM MK2 BFH 14.5" MIDLENGTH UPPER RECIEVER GROUP W October 10, 2023
Reviewer: CH54 Bravo from Silver Spring, MD United States  
I have been looking at this upper for awhile. Availability has been a challenge Freedom Trading was great. Easy to order and a timely delivery. Will definitely keep you in my bookmarks.

Was this review helpful to you?

View All Customer Reviews