The XTAR MC2 is a compact and portable 2-channel battery charger. This is the included charger for the Modlite PL350 pistol light. It is USB based so it will work with any existing USB charger power plugs at home or in your vehicle.
This product is an an adapter plate for the ModButton Lite to allow the button to mount on a MLOK rail.
The package contains the MLOK adapter and MLOK mounting hardware.
Made in the USA
Weight: 1.0ozDimensions: 1.0 x 2.0 inMounting Side: Left or RightColor: Black
Weight: 1.0ozDimensions: 1.0 x 2.0 inMounting Side: Left or RightColor: Black or FDE
The Nitecore D2 is a universal smart charger compatible with almost all cylindrical rechargeable batteries, thus eliminating the need to own several chargers. The D2 automatically detects Li-ion, Ni-MH and Ni-Cd batteries, and through manual selection is also capable of charging LiFePO4 batteries. Intelligent charging circuitry selects the optimal charging mode (CC, CV and dV/dt) for a given battery and each of the D2’s two microcomputer-controlled charging slots then monitors and charges the battery independently. Furthermore, an integrated digital LCD screen clearly displays charging progress, voltage, current and time while an intelligent automatic power-off function terminates current when charging is complete. The Nitecore D2: The world’s most advanced fully-automatic digital charger. It’s as simple as insert, detect and charge.
The Modlite 18650 3500mAh is the best battery that Modlite offers for high discharge flashlights. The cell inside the battery is made by LG Chem in Korea. Modlite added a high quality protection PCB/BMS along with the button/nipple top in an ISO 9001 certified factory to all safety standards. A black wrap is put over the top to hold it together. This is the cell Modlite recommends for the PLHv2 and OKW light heads. This cell will also work with the Surefire M600DF and Streamlight HL-X lights for optimum performance.
Replacing your Scout Light's Rear push-button cap assembly with this cap allow you to attach a SureFire even greater versatility. The cap's lock-out feature positively prevents activation during tactical operations, transportation, or storage. Made from aerospace aluminum, Mil-Spec Type III hard-anodized and available in Black or Desert Tan, it's worthy upgrade for your Scout light.
The DS00 is a waterproof switch assembly for Surefire's Scout Light WeaponLights. Includes system disable feature, click-on/off pushbutton switch. The integrated pushbbutton and remote switch assembly operates independently providing switch redundancy.
The Modbutton is an integrated momentary only switch and offset Scout mount design providing a simple clean mount in one convenient package. Developed out of a need to conserve rail space and also deliver a switch which could handle the power needs of modern lights we worked with our partner Unity Tactical to help produce a small switch and mount solution that would backwardly compatible with the Surefire light ecosystem. Modbutton utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights. A unity built Surefire compatible lead, allows Modbutton to be backwardly compatible with all Surefire, Arisaka, and Modlite Scout bodies ass well as Surefire UE and DSOO tail caps.
The Modlite OKW light head is a direct replacement for the Surefire M600DF head. It can be used with the Modlite 18650 body or the smaller Modlite 18350 body. While lumen output is only 680 lumen the throw is about 400% greater than the M600DF. This light head is best suited for situations where extreme throw is needed.
The Modlite PLHv2 light head is a direct replacement for the Surefire M600DF head. It can be used with the Modlite 18650 body or the smaller Modlite 18350 body or Modlites handheld light bodies. While lumen out put with this is light is similar to the Surefire M600DF head, the throw is much better suited to a rifle mounted application at more than three times the throw than the M600DF. This light is a large step foward from the PLHv1 light. If you are looking for the best overall output and throw this is the head you want.
This light head is a direct replacement for the Surefire M600DF head. It can be used with the Modlite 18650 body or the smaller Modlite 18350 body. It will NOT fit M300 sized bodies. Lumen output is 680 lumens and the throw is about 400% greater than the M600DF. This light head is best suited for situations where extreme throw is needed.
2x Lithium CR123 cells are only supported with this light head. This head will not function on a single CR123 and will not function on legacy scout bodies.
This light head can be used with Modlite's 18650, 18350 body, or the Surefire M600DF Dual Fuel body. This is a dedicated IR illumination head that is designed to output IR light in the 850nm IR spectrum. The reflector is designed to deliver a good amount of spill and a well defined hot spot at distances up to 300 yards depending on atmospheric conditions.
The IR940 head is a dedicated IR illuminator head that is designed to output IR light in the 940nm IR spectrum. The reflector is designed to deliver a good amount of spill and a well defined hot spot at distances up to 75 yards depending on atmospheric conditions. This light head has the large visible signature reduction over our 850nm head and the Surefire Vampire Series of lights. If your looking for the most stealthy IR head currently available this is the light you want.
This light package contains a PL350 Pistol light switch and body assembly, and the PLHv2 Head. It also includes a single 18350 rechargeable batter, a set of PHLSTER ARC Switch Paddles, and a 2 Cell XTAR USB charger. A defining characteristic of the PL350 is its "Out the front" battery change ability which allows the user to quickly replace discharged batteries with fresh ones, without tools and without removing the pistol light body from the host weapon. The PL350 is designed to be compatible with current and future Modlite heads, ensuring long life and future upgrade paths.
This light package contains a PL350 Pistol light switch and body assembly, and the selected head of your choice. All lights include a single 18350 rechargeable battery, a set of PHLSTER ARC Switch paddles, and packages are available with and without a 2 cell XTAR USB charger. The 18350 cell supports Modlite heads for about 35-40 minutes of continuous use. A defining characteristic of the PL350 is its “Out the front” battery changeability, which allows the user to quickly replace discharged batteries with fresh ones, without tools and without removing the pistol light body from the host weapon.
Modular design is compatible with all slim Modlite heads, which lets the end user customize the light output to their specific needs.
Lights include a full set of PHLSTER ARC enhanced WML Switches, further letting the end user tailor the light to fit their hands and shooting methods.
The PL350 is designed to be compatible with current and future Modlite heads, ensuring long life and future upgrade paths.
This light package contains a PL350 Pistol light switch and body assembly, and the selected head of your choice. All lights include a single 18350 rechargeable battery, a set of PHLSTER ARC Switch paddles, and packages are available with and without a 2 cell XTAR USB charger.
The 18350 cell supports Modlite heads for about 35-40 minutes of continuous use. A defining characteristic of the PL350 is its “Out the front” battery changeability, which allows the user to quickly replace discharged batteries with fresh ones, without tools and without removing the pistol light body from the host weapon.
OKW:
Features:
Modular design is compatible with all slim Modlite heads, which lets the end-user customize the light output to their specific needs.
Lights include a full set of PHLSTER ARC enhanced WML Switches, further letting the end-user tailor the light to fit their hands and shooting methods.
At launch, the PL350 is well supported in the holster industry as well. For a list of companies with compatible holsters, please click HERE.
Lithium CR123 cells are not supported and if used will cause the cells to heat up and possibly explode or catch fire. We recommend our Modlite Protected Cells.
