Home > MANUFACTURERS
Choose a sub category:
AMERICAN DEFENSE MANUFACTURING B&T B.E. MEYERS
B5 SYSTEMS BENELLI USA BRAVO COMPANY MANUFACTURING
CRYE PRECISION DANIEL DEFENSE DEAD AIR SILENCERS
EOTECH FERRO CONCEPTS FN USA
FORWARD CONTROLS DESIGN GEISSELE AUTOMATICS HECKLER & KOCH
HESCO INFINITY KNIGHTS ARMAMENT COMPANY
L3 HARRIS LEWIS MACHINE AND TOOL LWRC INTERNATIONAL
MAGPUL MODLITE NIGHTFORCE
NOVESKE RIFLEWORKS Q RADIAN WEAPONS
REPTILIA CORP SB TACTICAL SCALARWORKS
SIG SAUER SILENCER CO SONS OF LIBERTY GUN WORKS
STACCATO SUREFIRE TRIJICON
UNITY TACTICAL VANGCOMP VORTEX OPTICS
Sort By:
Page of 18
BCM MCMR RAIL COVER KIT, 5.5-INCH BLACK BCM MCMR RAIL COVER KIT, 5.5-INCH BLACK

Perfect fit for your BCM® MCMR Handguard.
Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile.
Aggressive Non-Slip or Non-Reflective surface.
Ventilated for cooling.
Can be installed in either direction.
Measurements: Length 5.550", Width 0.625", Thickness 0.100"
Can be cut to any length, depending on users requirements.
Made in the U.S.A. of a high-strength polymer material.

Each Kit contains FIVE panel strips.

  $9.95
In Stock
BCM MCMR RAIL COVER KIT, 5.5-INCH FLAT DARK EARTH BCM MCMR RAIL COVER KIT, 5.5-INCH FLAT DARK EARTH

Perfect fit for your BCM® MCMR Handguard.
Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile.
Aggressive Non-Slip or Non-Reflective surface.
Ventilated for cooling.
Can be installed in either direction.
Measurements: Length 5.550", Width 0.625", Thickness 0.100"
Can be cut to any length, depending on users requirements.
Made in the U.S.A. of a high-strength polymer material.

Each Kit contains FIVE panel strips.

  $9.95
In Stock
BCM GUNFIGHTER QUICK DETACH SLING SWIVEL 1" D-RING BCM GUNFIGHTER QUICK DETACH SLING SWIVEL 1" D-RING

BCMGUNFIGHTER™ Quick Detach Sling Swivel 1” D-Ring

(Heavy Duty Design for 1” slings)

  • Contoured Design For Easy One Handed Operation
  • Tumble Deburred and Sand Blasted Before Plating
  • Carbon Steel with Manganese Phosphate Finish
  • For 1” Slings

  $14.95
In Stock
BCM GUNFIGHTER QUICK DETACH SLING SWIVEL BCM GUNFIGHTER QUICK DETACH SLING SWIVEL

BCMGUNFIGHTER™ Quick Detach Sling Swivel

(Heavy Duty Design)

  • Flush Plunger to Prevent Accidental Release
  • Tumble Deburred and Sand Blasted Before Plating
  • Carbon Steel with Manganese Phosphate Finish
  • For 1-1/4" Slings

  $14.95
(Out of Stock)
XTAR MC2 2 CELL CHARGER XTAR MC2 2 CELL CHARGER

The XTAR MC2 is a compact and portable 2-channel battery charger. This is the included charger for the Modlite PL350 pistol light. It is USB based so it will work with any existing USB charger power plugs at home or in your vehicle.

  • Compact Size
  • Automatically chooses most suitable charging current
  • Compatible with all sizes of cylindrical lithium-ion batteries ranging from 10440 to 26650
  • 0V activation can bring dead batteries back to life
  • Automatically stops when charging is complete and prevents batteries from being over-charged
  • Features reverse polarity protection if you accidentally insert a battery the wrong way

Compatible with:

  • Apply to 3.6/3.7V Lithium Ion/IMR/INR/ICR: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650

  $15.00
In Stock
VANG COMP SYSTEMS REMINGTON DOME HEAD SAFETY VANG COMP SYSTEMS REMINGTON DOME HEAD SAFETY

The venerable Vang Comp Dome Head Safety switch. These are turned from a solid piece of steel bar-stock. This nifty little device works perfect if you shoot with gloves or just need a safety switch that you can toggle without having to think about it or take your eyes off of the action.

**Caution! Do not use with recoil mitigating stocks such as the “KNOXX” style. Doing so can damage your firearm.**

  $15.00
In Stock
VANG COMP SYSTEMS STAINLESS STEEL MAGAZINE FOLLOWER VANG COMP SYSTEMS STAINLESS STEEL MAGAZINE FOLLOWER

The ol’ reliable Vang Comp Stainless Steel Magazine Follower. These are turned from a solid piece of stainless steel bar-stock. This multitasking replacement for your factory-installed magazine follower not only travels smoother in your magazine tube due to it’s reduced bearing surface but it actually collects dirt and debris from the inside of your magazine

  $15.00
In Stock
MAGPUL PMAG 30 AR-M4 GEN M3 MAGPUL PMAG 30 AR-M4 GEN M3

The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.

The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in the U.S.A.

  $15.95
In Stock
BCM GUNFIGHTER QD END PLATE BCM GUNFIGHTER QD END PLATE

BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.
Machined from steel, and easily accommodates staking.
Like all BCM products, Made with pride in the U.S.A.

  $16.95
In Stock
MAGPUL PMAG 30 AR-M4 GEN M3 WINDOW MAGPUL PMAG 30 AR-M4 GEN M3 WINDOW

The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCARN MK 16/16S, and others.
Similar to the MOE® PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.

The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris ntrusion and protect against potential damage to the top cartridge during storage and transit.

Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel® system provides positive verification without affecting the durability or reliability of the magazine.

Made in the USA.

  $17.95
In Stock
BCM GUNFIGHTER QUICK DETATCH SLING MOUNT - M-LOK BCM GUNFIGHTER QUICK DETATCH SLING MOUNT - M-LOK

Low-Profile for increased mobility and decreased "snag" factor
Compatible with M-LOK mounting system
Fits standard push button, quick detach sling swivel (not included)
8-position (360°), non-rotational locking interface
All steel construction
Quick detach sling swivel not included.
* M-LOK® is a registered trademark of Magpul Industries Corp.

  $17.95
In Stock
BCM GUNFIGHTER GRIP MOD 3 - BLACK BCM GUNFIGHTER GRIP MOD 3 - BLACK

The BCMGUNFIGHTER™'s Grip (GFG) features:
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)

  $17.95
In Stock
BCM GUNFIGHTER GRIP MOD 3 - FLAT DARK EARTH BCM GUNFIGHTER GRIP MOD 3 - FLAT DARK EARTH

The BCMGUNFIGHTER™'s Grip (GFG) features:
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)

  $17.95
In Stock
BCM GUNFIGHTER QUICK DETATCH SLING MOUNT - KEYMOD BCM GUNFIGHTER QUICK DETATCH SLING MOUNT - KEYMOD

Low-Profile for increased mobility and decreased "snag" factor
Compatible with KeyMod mounting system
Fits standard push button, quick detach sling swivel (not included)
8-position (360°), non-rotational locking interface
All steel construction
Quick detach sling swivel not included.

  $17.95
In Stock
BCM GUNFIGHTER VERTICAL GRIP MOD 3 M-LOK - BLACK BCM GUNFIGHTER VERTICAL GRIP MOD 3 M-LOK - BLACK

M-LOK Direct Attach Version
Low-profile length for increased mobility and decreased snag factor.
The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
Can be mounted in reverse angle to increase control when grabbing handguard and grip.
Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
A lightweight design at 1.9 ounces.
Made in the U.S.A., manufactured from high quality, impact resistant polymers.

  $18.95
(Out of Stock)
BCM GUNFIGHTER VERTICAL GRIP MOD 3 M-LOK - FLAT DARK EARTH BCM GUNFIGHTER VERTICAL GRIP MOD 3 M-LOK - FLAT DARK EARTH

M-LOK Direct Attach Version
Low-profile length for increased mobility and decreased snag factor.
The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
Can be mounted in reverse angle to increase control when grabbing handguard and grip.
Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
A lightweight design at 1.9 ounces.
Made in the U.S.A., manufactured from high quality, impact resistant polymers.

  $18.95
(Out of Stock)
BCM GUNFIGHTER KAG - BLACK M-LOK BCM GUNFIGHTER KAG - BLACK M-LOK

BCMGUNFIGHTER™ KAG-MCMR (M-LOK® Compatible*)
Kinesthetic Angled Grip - KAG
The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
Works as a rest for supported firing positions
Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
Small profile is just enough to get repeatable hand position on weapon forend
Textured in front and back for positive engagement
Made in the U.S.A. from high quality, impact resistant polymers.

  $18.95
In Stock
BCM GUNFIGHTER KAG - FLAT DARK EARTH- M-LOK BCM GUNFIGHTER KAG - FLAT DARK EARTH- M-LOK

BCMGUNFIGHTER™ KAG-MCMR (M-LOK® Compatible*)
Kinesthetic Angled Grip - KAG
The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.
Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
Works as a rest for supported firing positions
Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
Small profile is just enough to get repeatable hand position on weapon forend
Textured in front and back for positive engagement
Made in the U.S.A. from high quality, impact resistant polymers.

  $18.95
In Stock
MODLITE MODBUTTON LITE M-LOK ADAPTER - BLACK MODLITE MODBUTTON LITE M-LOK ADAPTER - BLACK

This product is an an adapter plate for the ModButton Lite to allow the button to mount on a MLOK rail.

The package contains the MLOK adapter and MLOK mounting hardware.

Made in the USA

Weight: 1.0oz
Dimensions: 1.0 x 2.0 in
Mounting Side: Left or Right
Color: Black

  $18.99
In Stock
MODLITE MODBUTTON LITE M-LOK ADAPTER - FDE MODLITE MODBUTTON LITE M-LOK ADAPTER - FDE

This product is an an adapter plate for the ModButton Lite to allow the button to mount on a MLOK rail.

The package contains the MLOK adapter and MLOK mounting hardware.

Made in the USA

Weight: 1.0oz
Dimensions: 1.0 x 2.0 in
Mounting Side: Left or Right
Color: Black or FDE

  $18.99
In Stock
B5 SYSTEMS TYPE 23 P-GRIP - COYOTE BROWN B5 SYSTEMS TYPE 23 P-GRIP - COYOTE BROWN

The B5 Systems Type 23 P-Grip offers an increased vertical grip angle and extended tang to improve ergonomics and ensure proper trigger index. Proudly made in the USA.

FEATURES
Aggressive texture for increased retention.
Accepts Battery Grip Plug.
Made of Milspec material.
Available in all standard colors.
SPECS
Weight: 2.20 oz.
Width 1.24 in.

  $19.00
In Stock
B5 SYSTEMS TYPE 23 P-GRIP - OD Green B5 SYSTEMS TYPE 23 P-GRIP - OD Green

The B5 Systems Type 23 P-Grip offers an increased vertical grip angle and extended tang to improve ergonomics and ensure proper trigger index. Proudly made in the USA.

FEATURES
Aggressive texture for increased retention.
Accepts Battery Grip Plug.
Made of Milspec material.
Available in all standard colors.
SPECS
Weight: 2.20 oz.
Width 1.24 in.

  $19.00
In Stock
B5 SYSTEMS TYPE 23 P-GRIP - BLACK B5 SYSTEMS TYPE 23 P-GRIP - BLACK

The B5 Systems Type 23 P-Grip offers an increased vertical grip angle and extended tang to improve ergonomics and ensure proper trigger index. Proudly made in the USA.

FEATURES
Aggressive texture for increased retention.
Accepts Battery Grip Plug.
Made of Milspec material.
Available in all standard colors.
SPECS
Weight: 2.20 oz.
Width 1.24 in.

  $19.00
In Stock
REPTILIA CQG PISTOL GRIP - BLACK REPTILIA CQG PISTOL GRIP - BLACK

Reptilia CQG with enhanced ergonomics and performance on SBR/PDW style platforms - Black

  $19.95
(Out of Stock)
REPTILIA CQG PISTOL GRIP - FDE REPTILIA CQG PISTOL GRIP - FDE

Reptilia CQG with enhanced ergonomics and performance on SBR/PDW style platforms - FDE

  $19.95
(Out of Stock)
REPTILIA CQG PISTOL GRIP - FIELD DRAB REPTILIA CQG PISTOL GRIP - FIELD DRAB

Reptilia CQG with enhanced ergonomics and performance on SBR/PDW style platforms - Field Drab

  $19.95
(Out of Stock)
VANG COMP SYSTEMS SPARE CARRIER FOR THE VCS DETACHABLE SIDE AMMUNITION CARRIER VANG COMP SYSTEMS SPARE CARRIER FOR THE VCS DETACHABLE SIDE AMMUNITION CARRIER

The best 6-shell shot card in existence. Made in the USA with premium webbing and UV-resistant elastic.
A rigid backer is sewn into the carrier to keep the same shape regardless of how many shells are in the carrier, allowing consistent and reliable loading of the carrier while installed on the shotgun.
This carrier is also shaped to fit the contour of the shotgun receiver, allowing for a low-snag install that looks like it belongs on the shotgun.

  $20.00
In Stock
Q TAPER ADAPTER Q TAPER ADAPTER

The Taper Muzzle Device was designed for silencers that requires a 90° square shoulder. Available for 1/2-28 or 5/8-24 muzzle devices.

SPECS:

  • MATERIAL: 17-4 STAINLESS STEEL
  • COATING: HEAT TREAT (COLOR MAY VARY)

  $20.00
FORWARD CONTROLS DESIGN CASTLE NUT FORWARD CONTROLS DESIGN CASTLE NUT

CNF (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with couple of changes:

1. Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts.
2. Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places. FCD does not advocate staking in more than two places; CNF's 4 staking notches mean that, at all times, 3 will be visible and available for staking. It simply gives the user more staking location options.
3. Coarse serrations on the wrench side of the nut, a single use feature to make it easier while rotating the CNF towards the end plate.

Army manual calls for the castle nut to be torqued to 38 to 42ft/lb, and staked in two places. While FCD is not in the "more is better, bigger is better" camp, there are times less isn't more.


It is FCD's opinion that a castle nut should be staked per TM. CNF's longer and deeper notch reinforces the belief that once installed and staked, it will not loosen without the user's deliberate action. We love the idea of quick detach, but some things on an AR are meant to stay put, and considerable effort was made to ensure that by the original designers. CNF is a continuation and evolution in that direction.

  $20.00
In Stock